Mike Wyatt, the new AMYA president, will be at PMYC on February 28th to sail MM’s with us. Come out and meet him. Bob
This post can be used for the first Victoria tuning item. It is here to assure that the Victoria Tuning category is represented in the right column list.
PMYC POST CATEGORIES
Updated: FEBRUARY 2019
- Live from the Field
- PMYC News
- Micro Magic Results
- Victorias Results
- DF65 Results
- Register my Boat
- Racing Rules
- Tuning Tips
- Tuning Tips – Micro Magic
- Tuning Tips – Victoria
- Tuning Tips – DF65
- Building Tips
- Building Tips – Micro Magic
- Building Tips – DF65
- Club Administration
- Fun Sailing Pics
- Sailing Basics
- For Sale
- Uncategorized (all posts without another category get this one)
- All Posts – Decreasing Date Order
Mike Wyatt, the new AMYA president has also backed out for today.
However, he may be with us next Thursday for our MM sail and then meet with us for a sandwich and beer after. I encourage all of you to show up next Thursday to meet him and express any thoughts you might have about the AMYA; more exact, “how can the AMYA help me and my club?” He wants to hear from all of you.
Next sail will be at 1pm on Monday. Primarily Vic’s, but all boats are welcome.
Next scored sail will be Vic’s on March 11th and then a scored MM regatta on March 21st.
And again, the State Vic Championship Regatta will be held at MMYC, Dobson Ranch Lake, on Saturday, March 23rd.
8 signed up already (some out of state) and should probably get 12 – 16. BUT AS OF NOW, I AM THE ONLY TUCSON BOAT SIGNED UP. Come on folks, cowboy up and race in the State Champ. You will learn a lot… it will be very good experience for all of you.
Register at: mesamodelyachtclub.000webhostapp.com/wp-content/uploads/2018/12/stateentry.pdf
You can fill out the form, write a $8.00 check and give it to me. One day, all day event on Saturday. Easy drive, plenty of parking and restrooms.
Also, check out the PMYC web page at: pimamicroyachtclub.com/
Jerry Walker has made many improvements and is still working on it. Any/all input is welcomed.
We had good winds and spirited races today. All sailed, but only the Vic’s were scored. We had 2 DF 65’s and one, MM.
We sailed the first 5 races at 2 laps, then shortened the course to 1 lap for the final 7 races.
We got in 12 races with 2 throw-outs.
Sue winters came on strong in the last 6 races, challenging Earl Olson for 3 rd. In the last 2 races, Sue scored a 2nd and 3rd, beating Jerry Robertson once, and nearly winning race 12 were Bob edged her out by a nose.
Earl did hang on to take 3rd by 1 pt., even with Sue closing in on him.
Jerry started strong with 3 firsts’ in the first 4 races, but Bob got it together and ran off 7 straight bullets.
Skipper of the day was Sue Winters. Sue started out slow and was in last place after the first 6 races, but put it into gear; nearly taking a 3rd.
Skipper # Total
Bob Spraker 26 12
Jerry Robertson 0 16
Earl Olson 00 38
Sue Winters 51 39
Gray Lee 17 42
Chris Winters — 47
Participation was a little light, with 7 skippers contesting the regatta. My brother-in-law, Steve Loehrer sailed my “#2 MM”, number 129. John and Jim Malmberg sailed the 1st race, though then retired, so I didn’t score either of them.
Every skipper had at least a second place finish; Jerry had 4 seconds and a first, Steve had 4 seconds, Hayden had 2 seconds and 4 thirds and Leland had 1 second and 2 thirds.
We sailed 12, one lap races with 2 throw-outs. Below is the final tally.
And as usual, Bob got all the shifts… just lucky again.
Skipper Sail # PTS
Bob Spraker #29 10
Jerry Robertson # 0 25
Steve Loehrer #129 29
Hayden Watson #357 34
Leland Dorrenbos # NA 39
My vote for Skipper of the day is Steve Loehrer. Steve has only sailed RC about 6-7 times and that at only about twice per year. With his limited experience he sailed a masterful regatta, with numerous great starts, beating everyone off the line several times. In one race he led wire to wire until the very end, when a lucky shift favored his brother-in-law (me) and lost by about 6” to Bob (that’s a male’s 6”, so you know how close that was).
Sunny skies again and another great day.
Mast base position on the deck controls the center of effort fore & aft. Moving the mast aft brings the center of effort aft, thus increasing weather helm. If you have a movable mast, adjust it aft for light air and move forward as wind increases. I will move the base 1” forward of the “standard” Vic mounting hole in heavy (20+ mph) air, standard position in medium and as far back to the keel bolt in light. This is a lot of work and can take time. I usually do a “garage setting” at home, based on the days forecast and usually don’t move it during regatta day. If your mast is not movable, use the standard Vic mounting hole as default. You can control the center of effort pretty well with mast rake just using standard mast position.
Forestay – This controls mast rake; very important. The amount of mast rake and mast position controls the amount of weather helm. Raking mast aft in light winds for a slight weather helm is desirable. As the wind increases so does weather helm. Reduce rake with increased winds; going as far as mast forward in strong winds. I usually don’t rake the mast as much as most skippers in light air, but rake forward more in heavy air.
Halyard – Jib halyard tension sets the amount of curvature in the luff AND the draft position. The tighter the halyard, the less curvature in the luff. I typical like a draft position of 40% aft of the luff; this should be your default position. Set the tension based on wind and wave conditions to be more precise. More curvature moves the draft forward which gives more power, but reduces pointablity. Stronger wind conditions push the draft aft, so increase tension as wind increases. The choppier the water, the more curvature you need forward to punch through waves. Also, some curvature forward is needed for power in light winds. With medium wind and flat water, less curvature gives better pointing and better upwind VMG. Less curvature gives better pointability, but is harder to steer/control. Use halyard tension to set draft position based on wave conditions, wind speed and your steering ability. I usually set the halyard to have a “little slack” as compared to the forestay.
Topping Lift – The topping lift controls the amount of leach tension and twist in the jib. As wind increases, the backstay needs to be tightened to control forestay sag. As backstay tension is increased, jib leach is tightened, thus reducing jib twist and closing down the slot. Offset increased backstay tension by increasing the amount of topping lift tension to maintain twist and an open slot. Note: when there is a lot of wind speed variability, I use a little more backstay AND more topping lift tension.
Outhaul – Jib outhaul controls the amount of camber in the sail (not draft position). Typical jib camber is between ½ and ¾ inches; less with very strong wind. I typically sail with 5/8” of camber in the jib and set draft position (with halyard) based on waves and wind. A little more camber and forward curvature in light and choppy conditions and less camber and less forward curvature in stronger winds. In heavy winds, I set the camber as low as ¼”.
Sheet – The jib sheet setting dictates the angle sailed close-hauled. I mark my deck at 10, 15 and 20 degrees. I use 20 degrees in light air as a normal setting and work in tighter as the wind picks up. 15-17 degrees for medium air and as close as 12 in heavy air. You can pinch up to 10 degrees to make a mark, etc., but that is not good VGM. Jib sheet and main sheet angles need to be coordinated however. I use up to an 8-10 degree differential in medium/light air (4-8 mph) and less as wind increases. Main sheet angle is 12-14 for light, 8-10 medium and 12-18 for heavy. As the boat gets over powered in heavy wind, I back wind the main by sheeting out to the same angle and then some as compared to the jib. For instance, in 20+ mph wind, the jib angle may be 12 degrees with the main at 16. Windward then, you are basically sailing on the jib, with just a little main drawing.
Deck Pivot – Determines jib boom height and pivot point. Many boats have an adjustable jib pivot position which you can use. I personally have found that a fixed position works just fine. I typically locate the pivot 3” aft of the bow. Technically, I would move it back to 3.5” with the mast step aft and as close as 2.5” when the mast is forward in heavy air, but this seems to make very little difference. Jib boom height is a different matter. In light air I believe it is best to have the jib boom somewhat off the deck, up to 1.5”. But more importantly, I want the jib boom to be a minimum of 1.0” BELOW the main boom. This is due to “up wash” from the jib to the main. You want all the air from the jib to be directed around the main. In heavy air, I want the jib boom (& main) to be as close to the deck as possible to lower the center of effort. This reduces heel & the dreaded “big round-up”. I usually just keep the jib boom low, about ½” – ¾” off the deck at the pivot point.
Backstay – I include the backstay under the main because it is aft, but it really has more influence on the jib than main. I start with a “just taught” backstay in light wind and increase tension as the wind increases. As you increase tension, you open the leach of the main, so increased vane tension is needed.
Halyard – The main halyard sets the draft position in the main. I like the draft to be about 30-35% aft. In light air I have a loose halyard for forward draft and to eliminate the “bubble” in the mainsail when off the wind. Tighten the halyard as air increases.
Outhaul – This sets the main camber. A good average setting is 1.5”. I use a little less on very light days and increase as the wind picks up to the 1.5” setting around 4 mph. Medium air (5 – 10 mph), about 1.25” – 1.5” and reduce as air increases. In 20+ air, I have the foot almost flat.
Vang – Along with the backstay, this is the adjustment I use most during a regatta. Once you set the mast rake position with the forestay, I use the backstay and vang to set the main leach tension (twist) for the current wind conditions. I like a lot of twist in all conditions as compared to most skippers. Twist is hard to judge, but to put a number on it, I would say 10 – 15 degrees off the foot. I like quite a lot of twist in light air (15 degrees+) and reduce as wind picks up. Minimum twist is in the 8 – 12 mph area, but still around (8 – 10 degrees). I then increase main twist as the air gets heavy to “spill” air to reduce heel.
Sheet – We have already discussed the mainsheet and the main boom angle. Default is to have it point to the cockpit side knuckle (about 10 degrees). But more important, main boom angle needs to be coordinated with the jib boom angle as dictated by wind/wave conditions, as discussed above.
Battery Placement – Your battery location can help control fore-aft boat trim. Place your finger just behind the keel fin. I want my boat to be level with the waterline on light days, with more and more aft tilt as the wind increases. On 20+ days, move the battery all the way back to rudder post.
Three significant improvements have been made to the site over the past week.
- The calendar of Club events is now easier to maintain. You can see a small version of it on the right column of a computer screen. You can view a full page version of the calendar by clicking on here or on the PMYC Event Calendar menu item.
- The Blog, containing our many articles about model yachting now also has the Club racing results included. This assures that the race results will be available to all without having to search their email.
- From anywhere in the site, you can click on one of the “Post Categories” on the right side of the screen. If you want the race results for all racing, click on “Race Results”. If you want the results of just one class, click its class name, eg. “Micro Magic Racing Results”.
TMYC is now merged with PMYC.
We are going to use the Pima Micro Yacht Club name and web site.
Jerry Walker is working on the PMYC web site. We now have a calendar and tabs for Vic, MM and DF65.
Jerry will continue to work on the web site for us integrating the MM and DF65 info.
Bob wrote this on Feb. 12. It is a bit out of order on the Blog but I wanted it to appear for historical purposes. Jerry Walker
Bob said on Feb 12.:
I want to apologize for any confusion regarding this past Monday’s Vic scored regatta.
For the last few months, we have held regatta’s with a split into two groups; a silver fleet and a gold fleet.
This had mild success, but it had become apparent to me that we didn’t have enough boats to warrant a split.
On non-scored Mondays, I called it an “all swim” or “all Sail”. When I sent out the notice for this Monday’s scored regatta, I called it an “all sail”, referring to all Vic’s sailing as a single fleet, not thinking that to some others it would mean all classes of boats.
Well 2 DF65’s and a MM showed up to race. I’m fine with that, since the DF 95s and MM are at a great disadvantage to the Vics. The last month or so is the first time in years that we have had boats in the club that were not all one design. I’m all for greater participation, so all are welcome. However, in the future we will allow only class boats in a scored Vic or MM regatta.
With that said, all the current boats sailing are welcome to race on non-scored days with the Vics and MMs.
I say “current” boats because I want to limit it to the DF65s and MM. It can potentially get too out of control if we allow Seawinds, ODOMs, DF95s, etc.
I think the DF65 is the boat of the future. Sailable right out of the box and all spare parts available from Dragon Sailing. I can envision when we get several more DF65s sailing, that we will have a third fleet. Say from 11-1pm on Thursdays, just before sailing the MMs at 1pm. When we get to the 3+ boat level, I can see myself purchasing a DF65. At present, I see Vics on Mondays and if we get a DF65 fleet, I would prefer only Vics on Mondays.
When we have all boats sailing (Vics, DF65s & MM) on non-scored days, all boats sail under the SAME Rules. All boats have the same rights and obligations under the sailing rules, regardless of speed, size or sailing ability.
We can talk more about this on Thursday and again next Monday. I do not want to exclude anybody, but at the same time want to keep to a pure class on scored regatta days. We will have one Vic and one MM scored regatta per month.